EnviroStrip Pro

Description

PureSeal EnviroStrip Pro is our water-based coatings remover. This stripping gel is much more safer than solvent-based alternatives, and due to no Dichloromethane being present, you do not need to have HSE training to use the product for paint removal. It is still important to contain and remove any debris created whilst using this product and it should not be allowed to enter any drainage system.

Always test on a small, inconspicuous area before use to enable you to work out coverage and method of removal. Mask any painted or sensitive surfaces local to the working area. Apply to the surface in a thick layer without brushing the product out too thin. Leave on the surface for 20 minutes. Apply another thick coat directly on top of the first coat, leave for a further 20 minutes, and then pressure wash off. If you are removing multiple layers or tough coatings like polyurethane, you may need to cover the stripping gel for 8-12 hours with a plastic sheet to prevent it from drying out and then pressure wash off the following day. Always pressure wash off from the bottom upwards to prevent washing the stripping gel off above the working area. Do not apply to a wet surface and keep any water away from a treated surface.

Do not allow EnviroStrip to dry out as the coating you are trying to remove will re-set. Do not allow the gel to get wet, this will hinder performance.

• Eye protection,
• Chemical resistant gloves,
• Overalls

Up to 2m² per litre per coat