Sodium Hypochlorite 15%

Description

Sodium Hypochlorite 15% in 25 Litres.

PureSeal Sodium Hypochlorite is our label-compliant oxidiser, a professional-use-only Sodium Hypochlorite. It cleans, sanitises, and disinfects most external hard surfaces.

This product should not be used as a biocide, and we always recommend cleaning the surface prior to use.

Application:

Always test on an inconspicuous area prior to use.

Clean the surface first with a pressure washer, or for severe build-up, treat the surface first with PureSeal BacClear Pro. Dilute Sodium Hypochlorite to a ratio of 1 part product to 4 parts clean water.  Apply the diluted product to the surface with a suitable sprayer or brush and leave it to dwell for 30 minutes without allowing the product to dry out; this is extremely important.

Once you have allowed a sufficient dwell time, agitate if required, then rinse thoroughly.

You may need to go stronger if required; moreover, this product can be used neat to spot-clean stubborn areas.

1. Always pre-wet any surrounding plants, grass and delicate surfaces that may come into contact with the product. We recommend doing this before and after using Sodium Hypochlorite.
2. Avoid allowing Sodium Hypochlorite to come into contact with lead. If this happens, reverse the damage by using OxyAcid Pro.

Coverage:

Up to 6m² per litre of diluted product

• Chemical resistant gloves
• Eye protection
• Respirator with ABEK P3 filters
• Overalls with head and neck protection