Low Slip Granules

Description

PureSeal low slip granules are added to our sealers to make newly sealed surfaces safer under foot. Suitable for use with Concrete Sealer Pro and MultiSeal Pro only. These tiny wax particles are perfect for sloped surfaces or smoother surfaces if there is a potential that they will become slippery when the new sealer has been applied.

Application:

One container of granules is perfectly measured to be added to 25 litres of solvent based sealer. Add the granules slowly whilst stirring the sealer with a paddle mixer/whisk ensuring an even mix. Do not add the whole bottle at once as these will congeal and take a lot of mixing to separate. It is important that the low slip granules are used for all coats of sealer, not just the final one as you will not get the correct amount of resistance if used for the final coat only.

Tip a small amount at a time of the granules in to the drum of sealer when mixing. Keep mixing until there are no large clumps of granules in the sealer. 5-10 minutes.

This will depend on the sealer you are using. Refer to the product Safety Data Sheet.

1 container per drum of sealer