Limestone Restorer Pro

Description

Limestone Restorer Pro’s special formula bonds with the surface and provides long-lasting protection. It resists both staining and water ingress while enhancing the substrate’s colour, improving its overall appearance. It can be used on Black Limestone, most Natural Stones, Brick, Concrete Paving, absorbant Marble, and Granite.

The surface should be thoroughly dry, clean and free from mould, algae and efflorescence before application. All cleaner residues must be removed from the surface with a pressure washer as remaining cleaner could render the stone impermeable. Ensure footwear is clean or wear protectors to avoid contamination. Always test a small inconspicuous area before use to ensure surface compatibility, performance and finish is acceptable. DO NOT DILUTE. Shake well before use. Do not pour directly on to paving. Apply using a paint pad to one paver at a time, ensuring an even coat. Finish the application on the joint. Mop up residue/excess product with a rag or lint free cloth immediately as you continue the application. Failure to do so will result in a slippery surface when wet. Substrate temperature must not exceed 20°C during application.

When wiping the excess sealer from the surface remove as much as possible. Remove as much excess from the application tool as possible to reduce the amount of buffing required.

• Eye protection,
• Disposable gloves

Up to 30m² per litre