ConcreteSealer Pro ULTRA 25L

Description

PureSeal ConcreteSealer Pro ULTRA is a the highest solids acrylic sealer available on the market and is designed for sealing block paving, slabs or imprinted concrete. This concrete sealer offers greater coverage rates and a tougher, more durable finish due to its higher resin content. It is easy to apply by brush, roller or sprayer, and because it is solvent-based, it dries quickly to a super strong finish, which is perfect for commercial environments. The sealer’s finish will range from enhanced to gloss, depending on the number of coats applied.

Depending on the surface you are working with, you can apply concrete sealer pro with a brush, roller or sprayer. A heavy first coat is beneficial on block paving, whereas lighter coats will be required on pattern-imprinted concrete to prevent bubbling. Allow 40 minutes between coats. Apply your second coat 90 degree to the first. Clean tools and equipment with xylene after use. Do not use a roller on block paving to prevent spreading sand across the surface. Do not apply this sealer if the ground temperature is over 22 degrees as this will cause the sealer to flash dry and fail.

Remove any excess sand from block paving with a leaf blower before application. Mask and protect delicate surfaces to prevent damage.

• Chemical resistant gloves,
• Eye protection
• Respirator with ABEK P3 filters,
• Overalls

Up to 10m² per litre, per coat, depending on the porosity of the surface