Description
Sodium Hypochlorite Pro is our label-compliant blended oxidiser, a professional-use-only blend of Sodium Hypochlorite and boosters designed to perform as good as, if not better, than other Sodium Hypochlorite products.
This product should not be used as a biocide, and we always recommend cleaning the surface prior to use.
Application:
Always test on an inconspicuous area prior to use. Clean the surface first with a pressure washer, or for severe build-up, treat the surface first with PureSeal BacClear Pro. Dilute Sodium Hypochlorite Pro to a ratio of 1 part product to 4 parts clean water. Use stronger if required. Apply the diluted product to the surface with a suitable sprayer or brush and leave it to dwell for 30 minutes without allowing the product to dry out; this is extremely important.
Once you have allowed a sufficient dwell time, agitate if required, then rinse thoroughly. You may need to go stronger if required; moreover, this product can be used neat to spot-clean stubborn areas.
Top Tips:
- Always pre-wet any surrounding plants or grass that may come into contact with the product. We recommend doing this before and after using Sodium Hypochlorite Pro.
- Avoid allowing Sodium Hypochlorite Pro to come in to contact with lead. If this happens, reverse the damage by using OxyAcid Pro.
Up to 6m² per litre of diluted product
PPE Required:- Chemical resistant gloves
- Eye protection
- Respirator with ABEK P3 filters
- Overalls with head and neck protection
