PhosClean Pro

Description

PureSeal PhosClean Pro is an acid-based product for professional use only. Due to its unique concentrated and powerful blend, PhosClean Pro can be used at different dilution ratios, ranging from 1:10 to neat if required. It is effective at removing rust, limescale, cement/mortar, and hard water stains without damaging or discolouring the surface being treated.

For professional use only. Always carry out a test patch on an inconspicuous area to determine compatibility and consumption rates. It is advisable to wash the surface first to remove any loose debris and surface contaminants. Ensure the surface is dry prior to use. Dilute PhosClean Pro with clean water, adding the concentrate to the water in a sprayer or a bucket, not the other way around. For general stain removal dilute 1 part product with 10 parts water. For stubborn staining dilute 1 part product with 4 parts water. Only use this product neat if it is required to do so. Full PPE should be worn whilst diluting and using PhosClean Pro. Apply to the surface with a sprayer or a brush, allow to dwell for 15 minutes and rinse thoroughly. Repeat if necessary. Do not allow the product to dry out. If this does happen, simply reapply PhosClean Pro, agitate and rinse thoroughly.

Add PureSurf Boost to PhosClean Pro when using it on a vertical surface. Do not use PhosClean pro in any vessel that has contained Sodium Hypochlorite.

• Eye protection,
• Acid resistant gloves,
• Respirator with ABEK P3 filters,
• Overalls

Up to 6m² per litre