SolarClean Pro

Description

---

SolasrClean Pro is a professional strength cleaner that removes the build-up of dirt and grime from solar panels. An active blend of surfactants and activators to give superior performance. This product is non-caustic and will not damage or change the appearance of solar panel frames, glass, fixtures, or fittings.

Surface Preparation:

Always test a small hidden portion of SolarClean Pro on the substrate before use to check compatibility and performance before commencing with the whole area. The ideal operating temperature is between 10ºC 20ºC. Remove loose dirt, moss, and other debris from the surface prior to treating. Do not apply in direct sunlight.

Application:

Shake well before use. Apply, using a sprayer or brush, to a dry surface at a rate of 4-6 m² per litre of mixed product. Depending on the degree of contamination, more may be required.

Dilution rate:

Light Contamination – Dilute at a ratio of 1:25 (1 part MaxClean Pro to 25 parts water). Heavy Contamination – Dilute at a ratio of 1:10 (1 part MaxClean Pro to 10 parts water).

Ensure heavily contaminated areas are saturated with products. Scrub well with a brush. Leave for 20 to 30 minutes, do not allow it to dry out. Clean with a brush and water. For a spotless finish, rinse with pure water. Remove as much excess product as possible and clean tools and equipment after use with soapy water.

Top Tips:

Ensure you give the product maximum dwell time for best results. If the product begins to dry out, re-apply more product to prevent it from doing so.

Coverage:

Up to 6m² per litre, depending on the degree of contamination on the panels.

PPE Required:

• Eye Protection
• Disposable Gloves
• Overalls