Porcelain Pro Sealer

From: £52.00

Share With Friends



Porcelain Pro Sealer

PureSeal Porcelain Sealer Pro is an advanced sealer for internal and external Porcelain surfaces. This product penetrates the surface rather than creating a film on the top of the Porcelain which not only creates an invisible bond but is also completely breathable. Once fully cured, PureSeal Porcelain Pro will repel oil, grease and water is achieved after the product is completely dry but it may take up to 7 days to reach maximum protection.

This WILL NOT work on non-porous surfaces which includes polished or glazed surfaces.


Always test a small inconspicuous area of the substrate to ensure compatibility and calculate coverage.

The Porcelain should be clean, dry and free from dirt, algae etc prior to application. Do not apply if rain is forecast within 4 hours of application. Keep pets and children away from treated surfaces until the sealer has completely dried. Allow 24 hours before heavy traffic.

Only apply in temperatures between 10°C and 30°C.

Apply a generous coat at approximately 9-12m² per litre using a brush or sprayer. Apply evenly ensuring not to leave brush marks or puddles on the surface. If puddles or pooling occurs, then use a cloth to remove these. If left on the surface the sealer will dry patchy and reduce performance. If you find that the Porcelain is absorbing the product fast, apply a first coat to saturation and remove any puddles and pooling, once the first coat starts to soak in, apply a second coat ensuring that this is done whilst the first coat is still wet (wet on wet).

Additional information

Weight N/A

5 Litre, 10 Litres, 20 Litres


There are no reviews yet.

Be the first to review “Porcelain Pro Sealer”

Your email address will not be published. Required fields are marked *