Concrete & Grout Remover Pro

Description

Concrete & Grout Remover Pro has been blended using ingredients that will reverse the molecular bonding action of cement turning it back into sand and aggregate which can then be easily removed with a light pressure wash. This product is perfect for removing concrete, mortar and other grouting products from patios, driveways etc. Due to the ingredients used, it will not harm the surface and will not react with metal surfaces. This is safer to use than our other acid based products and can be used on most surfaces including granite and limestone.

Test a small inconspicuous area prior to use. Ensure the working area is well ventilated and always wear PPE when using this product.
Remove any loose deposits from the surface and if lumps of cement are present, scrape these off prior to application taking care not damage the surface. Apply the product with a brush or sprayer ensuring the surface is saturated. Do not allow the product to dry out as this will leave a chalky residue on the surface. If this happens, re-apply the product to the surface. Leave the Concrete & Grout Remover Pro on the surface until the concrete or similar deposits have softened. This can take between 30-60 minutes. For extremely heavy build up, more applications may be required. Alternatively, apply 2 coats and leave over night. Rinse the surface with a pressure washer.

Top Tips:

If you have to cover the product to leave to work overnight, use cling film or other suitable plastic and weigh down with a heavy object. Do not use this product in a sprayer if it has contained sodium hypochlorite previously.

• Eye Protection,
• Chemical Resistant Gloves,
• Respirator with ABEK P3 filters

Up to 5m² per litre depending on thickness of stain